Hydraulic Puller 60KN In Power Construction

1, This hydraulic puller is used in power construction. 2, Easy started in low temperature. 3, Double braking protection.

Hydraulic Puller Introduction

1, this hydraulic puller is single bridge structure trailer.

2, the speed of the bull wheels can be varied stepless in both rotation directions. The pull can be controlled and be volume can be read on the dynamometer.

3, the max pull can be adjusted and equipped with overload protection system.

4, spring applied-hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.

5, with self-loading reel winder with automatic level wind,(hand work is also ok) to ensure that the wire can be evenly wound on the pilot wire reel.

6, hydraulic front jack and surge brake for axle.(can be chosen)

7, pre-heat unit to ensure the motor can be easily started in the cold weather.(can be chosen)

Product No.	020103
Type	WQT60-IV
Technology characteristics
Max pull(kn)	60
Max continuous pull(kn)	50
Corresponding speed(km/h)	2.5
Max pull speed(km/h)	5
Corresponding pull(kn)	25
Structure characteristics
Puller groove bottom diameter(mm)	450
Groove	7
Max reliable pulling rope diameter(mm)	18
Max fixed joint diameter(mm)	50
Overall dimensions(mm)	3280×1750×2100
Weight(kg)	3000
Main components
Engine	Cummins water cold
Power/rotating speed	77kw/2500rpm
Reducer	Rexroth made in Germany
Main hydraulic pump	Rexroth made in Germany
Main hydraulic handle	Rexroth made in Germany
Hydraulic valve	Atos made in Italy
Main hydraulic motor	Rexroth made in Germany
Hydraulic meter	Wika made in Germany
Pull meter	Fantinelli made in Italy
Hydraulic pipeline system	Manuli made in Italy
Electrical System(v)	24